Heavy Duty Vinyl Spray Adhesive
A3
The Morley Heavy Duty Vinyl Adhesive is for the perimeter fixing of all types of vinyl flooring as it is plasticizer migration resistant. It is also CFC free.
USES
It is used to fix all types of vinyl floorings, including vinyl backed carpets and tiles.
SUBFLOORS
Suitable subfloors include concrete, sand/cement screed, smoothing underlayment, plyboard, flooring grade chipboard, hardboard, wood and existing well bonded resilient flooring. Note: There are certain grades of flooring grade chipboard that have been treated with paraffin wax to provide a waterproof quality. These types of chipboards are not suitable for use with this adhesive With existing well bonded resilient flooring care must be taken to ensure the subfloor under the resilient flooring is sound and the surface of the resilient flooring is thoroughly cleaned of any polish etc. If this cannot be done, the existing resilient flooring must be removed and the subfloor made good before proceeding.
PREPARATION
Ensure that surfaces are clean, dry and dirt free. Shake can well before use.
APPLICATION
Spray the adhesive evenly from a distance of 10-20cms. For a strong bond, spray a number of light coats on both surfaces. For a lighter bond apply to one surface only. Allow 3-5 mins for the adhesive to become tacky, then press surfaces together firmly, working outwards from the centre to adhere a good bond. Excess adhesive can be removed with white spirit.
HEALTH & SAFETY PRECAUTIONS
- Refer to Material Safety Data Sheet and follow the advice given.
- Ensure area of use is well ventilated.
- Avoid prolonged contact with skin and if sensitive, use barrier cream or gloves.
- In case of contact with eyes, mouth or nose, rinse with plenty of water and seek medical help.
- If adhesive is spilled, remove and dispose of it in accordance with national and local regulations for waste materials.
Technical Specifications
Product Code: A3
Product Name: Heavy Duty Vinyl Spray Adhesive - A3
Type: 3-5 mins depending on temperature, humidity, sub floor porosity & trowel used
Storage: Store between temperatures of 5°C and 25°C
Shelf Life: 12 months in unopened containers, stored in recommended conditions
Cleaning: Overspray can be removed with a small amount of white spirit. Always test before going ahead
*Health and safety sheets available on request.