click to enlarge

Note: (14mm & 19mm Ramp Clip wood effect colours not available)

• This system is quick and easy to fit.
  
  
• The fitter retains full view throughout the fitting, allowing the placing and cutting of the flooring to be carried out precisely. This is particularly helpful for the fitting of laminate and wood flooring.
  
  
• Once the fitting of the flooring is complete, the fitter places the relevant profile into the uPVC track and pushes down.
  
  
• Once in place, the top is firm and secure. However, the system allows for the tops to be removed and replaced without damaging the flooring, should a change of decor be required at a later date.
  
  
• There are no visible fitting screws, thus providing a neat and attractive finish.
  
  
• The system is available at sensible prices - affordable for all installations!!

• Profiles conform fully to BS1474, 6063TF - providing a durable and hard wearing surface.
  
  
• Available in matt gold, bright gold, bronze and mill finish aluminium finishes. Matt gold, bright gold and mill finishes are available from stock, bronze will be made to order. The profiles will compliment any choice of decor. The anodised finishes conform fully to BS1615 1987.
  
  
• Stock lengths: 8mm profiles available in 2700mm & 900mm lengths. 14mm & 19mm profiles available in 2700mm lengths only.
  
  
• Packing: 8mm profiles available in tubes of 12 x 2700mm and boxes of 36 x 900mm. 14mm & 19mm profiles available in tubes of 6 x 2700mm only. Each tube/carton comes with equivalent metreage of single or double, predrilled uPVC track, together with fixing screws

click to enlarge

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: CC8-
Height levels: 8mm - 12mm
Uses: Laminate to laminatem laminate to ceramic, laminate to carpet, carpet to carpet.

Code: CC14
Height Levels: 14mm - 19mm
Uses: Wood to wood.

click to enlarge

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: RC8
Height Levels: 8mm - 12mm higher; 2mm - 6mm lower.
Uses: Laminate to carpet, laminate to vinyl, carpet to vinyl.

Code: RC14
Height Levels: 14mm-18mm higher; 2mm-6mm lower.
Uses: Wood to carpet, wood to vinyl.

Code: RC19
Height Levels: 19mm-23mm higher; 2mm-6mm lower.
Uses: Wood to carpet, wood to vinyl.

click to enlarge

Available in matt gold, bright gold, bronze and mill finish aluminium.

Code: SC8
Height Levels: 8mm-12mm
Uses: Perimter edging for laminate.

Code: SC14
Height Levels: 14mm-19mm
Uses: Perimter edging for wood.